1000 Watt Bendable Heating Element 1524mm Long 60 Inches
This element can be bent to the shape you require.
The determining factors when dimensioning straight rod elements are the specific loads and the temperature limits of the heated material, the tube shell and the heating conductor.
If the heating element is accurately dimensioned, it will operate reliably and over a long period. This also requires the element to be installed correctly and have an adequate outflow of heat. The temperature limits of the medium and, if liquids are heated, suitable protection against boiling dry should also be considered.
Straight rod elements are supplied in lengths ranging from 914mm (3ft) to 2439mm (8ft).
DIN 44875 also includes recommended specific surface loads.
Straight rod tubular elements are fitted with a standard M3 x 20mm long thread and are supplied with locking nuts and washers.
Gland Assemblies are supplied separately ( see listing below) for wet applications, or were a air tight seal is required. This is created by using a brass olive which compresses onto the element when the locking nut is tightened